Printable files
Community-published models for 911 trim and convenience pieces. These are a different thing from the parts catalog, and the distinction is the point.
Not performance parts. No public files exist for the printed titanium
parts in the catalog, and none are coming — the geometry is the product, and making one
needs laser powder bed fusion in titanium rather than a desktop printer. Everything here
is a clip, tab, holder or bracket. Nothing structural, and nothing in the exhaust, brake
or suspension path.
| Part | Fits | Source | Licence |
|---|---|---|---|
| Cupholder tensioner, 997 / 987 Replacement for the tensioner in the dash cupholder assembly, a well-known failure point that Porsche sells only as part of a costly assembly. Author recommends ABS or another temperature-tolerant filament rather than PLA, since the part sits in a dashboard that gets hot. A stronger variant is published alongside the standard one, and the design retains tension by friction so it still works if the original spring is missing. | 997 Also fits the 987 Boxster/Cayman, which shares the assembly. | Thingiverse by 3NCORE Trim | check on page |
| Cupholder gear, 997 The toothed gear from the cupholder mechanism, the other half of the same common failure. | 997 | MakerWorld by unattributed on listing Trim | check on page |
| Centre console switch tab, 964 / 993 Small switch tab for the centre console, a part that becomes brittle with age and is awkward to source. | 964, 993 | Printables by 9khil Trim | check on page |
| Phone mount, 997 (PCM side trim) Mount that wedges into the trim gap beside the PCM head unit rather than adhering to any surface. Cradle is dimensioned for a Pixel 5 in a silicone case; other handsets need the cradle rescaled. | 997 | Thingiverse by Badbadtz Convenience | check on page |
| Phone holder with ball joint, 996 Two-piece holder on a ball-and-socket joint, so the viewing angle adjusts after fitting. | 996 Listing also covers the 986 Boxster. | Thingiverse by keith1010 Convenience | check on page |
| MagSafe phone mount, 991 MagSafe-puck carrier sized for the 991 dash, avoiding an adhesive pad on the trim. | 991 Listing also covers 981 and 718 Boxster/Cayman. | Printables by Shader Convenience | check on page |
On licences
Every entry above is marked check on page because the licence has not been read on the model listing. Models on these repositories carry varying Creative Commons terms, and the non-commercial ones cannot be sold as prints. Read the licence before doing anything beyond printing one for yourself.
Files are linked here, never copied. Mirroring them would strip the authors’ terms and attribution.
Much of this index came from the 911uk.com 3D printing directory , which is the best community starting point.