Suspension & Chassis
Page 1 of 57 β 5,440 parts.
- KW automotiveπ©πͺ
Variant 3 Coilover Kit, 911 Carrera (991, PASM)
Twin-tube coilovers with rebound and compression adjusted separately, supplied with a PASM delete module.
Suspension & Chassis991Stainless Steel 304L - KW automotiveπ©πͺ
Variant 3 Coilover Kit, 911 G-Series (with OE torsion bars)
Coilover kit for the torsion-bar chassis, supplied with 19 mm raised spindles so ride height can drop without wrecking the geometry.
Suspension & Chassisg-seriesStainless Steel 304L - KW automotiveπ©πͺ
Clubsport 3-Way Coilover Kit, 911 GT3 (996)
Three-way adjustable clubsport dampers, splitting compression into high and low speed.
Suspension & Chassis996Stainless Steel 304L - Γhlins RacingπΈπͺ
Road & Track DFV Coilover System, GT3 / GT3 RS / GT2 (997)
Inverted monotube dampers with a floating internal piston, whose Dual Flow Valve shifts all four damping regimes from a single knob.
Suspension & Chassis9976061-T6 Aluminium - Γhlins RacingπΈπͺ
Road & Track DFV Coilover System, 911 Carrera (991)
The Carrera-valved version of the Road & Track system, on noticeably softer front springs than the GT3 fitment.
Suspension & Chassis9916061-T6 Aluminium - Γhlins RacingπΈπͺ
Road & Track DFV Coilover System, 911 (992)
Road & Track dampers valved for the 992 chassis.
Suspension & Chassis9926061-T6 Aluminium - Elephant RacingπΊπΈ
Spring Plate Replacement Bushings, 911 (964)
Monoball cartridge wrapped in an elastomeric layer, so the joint loses deflection under load without handing the cabin the noise a bare spherical bearing would.
Suspension & Chassis964Chromoly SteelElastomer - Elephant RacingπΊπΈ
QC and Offset Camber Plates, 911 / 912 / 930
Camber plates for the torsion-bar cars, in quick-change and fixed-offset forms.
Suspension & Chassis901g-series6061-T6 Aluminium - Elephant RacingπΊπΈ
Suspension Bushings and Bearings, 911 (993)
Bushing and bearing range for the last air-cooled car's multi-link rear end, where the factory rubber is both the weak point and the NVH solution.
Suspension & Chassis993Chromoly SteelElastomerDelrin / POM - Tarett EngineeringπΊπΈ
Front Adjustable Drop Links, 911 (996 / 997 / 991 / 992)
Rod-end drop links replacing the factory plastic items, with left and right hand threads so length adjusts without disassembly.
Suspension & Chassis996997991992Stainless Steel 304LChromoly Steel - Tarett EngineeringπΊπΈ
Rear Adjustable Drop Links, 911 (996 / 997 / 991 / 992)
The rear counterpart, adjustable to remove preload once ride height changes.
Suspension & Chassis996997991992Stainless Steel 304LChromoly Steel - Tarett EngineeringπΊπΈ
Rear Sway Bar and Bushing Kit, 911 (991)
Adjustable rear bar supplied with its bushings, the usual first move on balance once tyres outgrow the factory setup.
Suspension & Chassis991Chromoly Steel - Tarett EngineeringπΊπΈ
Front Sway Bar and Bushing Kit, 911 (996 / 997 / 991)
Adjustable front bar and bushings, shared across the water-cooled 911 and the Boxster/Cayman chassis.
Suspension & Chassis996997991Chromoly Steel - Bilsteinπ©πͺ
B16 PSS10 Coilover Suspension Kit, 911 (993)
Threaded-body monotube coilovers with ten-stage damping adjustment, covering Carrera through Turbo.
Suspension & Chassis993 - Bilsteinπ©πͺ
B16 PSS9 Coilover Suspension Kit, 911 Turbo (993)
The earlier nine-stage version, quoted at 15β35 mm lower front and 10β20 mm rear on the Turbo.
Suspension & Chassis993 - Tarett EngineeringπΊπΈ
Front Sway Bar and Bushing Kit, 911 (993 / 964)
Adjustable front bar with five attachment positions, supplied with bushings.
Suspension & Chassis993964Chromoly Steel - Tarett EngineeringπΊπΈ
Rear Sway Bar and Bushing Kit, 20.2 mm 3-Position, 911 (993)
Three-position adjustable 20.2 mm rear bar with bushings.
Suspension & Chassis993Chromoly Steel - Tarett EngineeringπΊπΈ
Front Strut Brace Kit, 911 (993)
Alloy front strut brace that bolts in without drilling or welding, aimed at limiting camber change under cornering load.
Suspension & Chassis9936061-T6 Aluminium - Tarett EngineeringπΊπΈ
Suspension Package, 911 (993)
Configurable package of bars, links and damping specified against street, DE or track use rather than sold as one fixed kit.
Suspension & Chassis993 - RennlineπΊπΈ
Strut Braces, 911 (993)
Front strut tower bracing.
Suspension & Chassis9936061-T6 Aluminium - RennlineπΊπΈ
Strut Mounts, 911 (993)
Replacement upper strut mounts, including monoball options.
Suspension & Chassis9936061-T6 AluminiumChromoly Steel - RennlineπΊπΈ
Links and Sway Bars, 911 (993)
Drop links and anti-roll bar hardware.
Suspension & Chassis993Chromoly Steel - RennlineπΊπΈ
Suspension Bushings, 911 (993)
Replacement bushing range including semi-solid options.
Suspension & Chassis993Delrin / POMElastomer - Elephant RacingπΊπΈ
QC and Offset Camber Plates, 911 (993)
Quick-change and fixed-offset camber plates for the 993 strut tops.
Suspension & Chassis9936061-T6 Aluminium - Elephant RacingπΊπΈ
Complete Suspension Package, 911 (993)
Bundled bushing, bearing and geometry package specified as a set rather than assembled piecemeal.
Suspension & Chassis993Chromoly SteelElastomer - Suncoast Porsche PartsπΊπΈ
Chassis and Suspension Range, 911 Carrera / Turbo (993)
Retailer's assembled 993 chassis range, including sway bar bushings and strut tower bracing.
Suspension & Chassis993 - Porsche AGπ©πͺ
Weissach CFRP Anti-Roll Bars and Coupling Rods, 911 GT3 RS (992)
Carbon anti-roll bars and rear coupling rods β the most surprising CFRP application on the car, and the one that saves the most weight in the package.
Suspension & Chassis992Carbon Fibre (prepreg, autoclave cured) - H&R Spezialfedernπ©πͺ
High Class Sport Lowering Springs, 911 (996)
Progressive lowering springs working with the original dampers.
Suspension & Chassis996Chromoly Steel - Eibachπ©πͺ
Pro-Kit Lowering Springs, 911 Cabriolet with PASM (997)
Road-biased lowering springs validated against PASM rather than requiring its deletion.
Suspension & Chassis997Chromoly Steel - Wiechers Sportπ©πͺ
Strut Brace (Domstrebe), 911
Front strut tower bracing from a German cage and chassis maker.
Suspension & Chassis9939969976061-T6 AluminiumChromoly Steel - BBi AutosportπΊπΈ
StreetCup Billet Uprights, 911 (964 / 993)
Machined billet uprights replacing the cast originals, letting suspension geometry be corrected rather than merely adjusted.
Suspension & Chassis9939647075-T6 Aluminium - BBi AutosportπΊπΈ
RSR Type Inner Tie Rod, 911 (964 / 993)
RSR-pattern inner tie rod, the steering half of a geometry correction.
Suspension & Chassis993964Chromoly Steel - BBi AutosportπΊπΈ
RSR Type Outer Tie Rod, 911 (964 / 993)
The outer half of the same RSR steering set.
Suspension & Chassis993964Chromoly Steel - Γhlins RacingπΈπͺ
DFV Road & Track Coilover System, 911 (993, all models)
The 993 fitment of the Dual Flow Valve system, covering Carrera through Turbo.
Suspension & Chassis9936061-T6 Aluminium - Tarett EngineeringπΊπΈ
Steering Rack Mount Reinforcement, 911 (964 / 993)
Reinforces the rack mounting, where the shell flexes under steering load on a hard-driven car.
Suspension & Chassis993964Mild Steel - Dundon MotorsportsβπΊπΈ
991 CUP, 981/718 CLUBSPORT Lower Control Arm Inner (+15mm Extended) - Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
992 GT3 Cup MCS 3-Way Suspension Package
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
991 GT3 Cup MCS 3-Way Suspension Package
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
996 GT3/GT3RS - Suspension Setup Package
Dundon Motorsports suspension listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis996 - Dundon MotorsportsβπΊπΈ
996 Carrera (RWD) - Suspension Setup Package
Dundon Motorsports suspension listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis996 - Dundon MotorsportsβπΊπΈ
996 C4/C4S/Turbo/Turbo S - Suspension Setup Package
Dundon Motorsports suspension listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis996 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports Rear Lower Control Arms 991 GT3 CUP
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991/992 GT3 Cup Rear Upper Tension Arm
Dundon Motorsports suspension listed for the 992, 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991 - Dundon MotorsportsβπΊπΈ
992 GT3RS Adjustable Sway Bar End Link Set - Front and Rear
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
991 Cup, 981/718 Clubsport Lower Control Arm Inner - Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports 996 997 Rear Tie Rod Kit
Dundon Motorsports suspension listed for the 997, 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997996 - Dundon MotorsportsβπΊπΈ
MCS 3-Way Suspension Package for 991.1 & 991.2 GT3RS/GT2RS without front axle lift
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports 991 Cup, 981/718 Clubsport Lower Control Arm Assemblies - Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
997 Turbo/Turbo S Adjustable Front Lower Control Arm Pair
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
997 Carrera/4/S/GTS Adjustable FRONT Lower Control Arm Pair
Dundon Motorsports suspension listed for the 991, 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991997 - Dundon MotorsportsβπΊπΈ
DSC Suspension Control Module - 987/997 Platform
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
DSC Suspension Control Module - 991 Platform
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3 Spring Kit - 80/110 N/mm
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3 Spring Kit - 100/130 N/mm
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3/RS Spring Kit - 120/150 N/mm
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3 RS Spring Kit - 140/170 N/mm
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3 RS Spring Kit - 160/190 N/mm
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
MCS 3-Way Suspension Package for 992 GT3
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports 992 GT3 Adjustable Sway Bar End Link Set
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
992 GT3 Adjustable Sway Bar End Link Pair (Front)
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
991/992 GT3 Adjustable Sway Bar End Link Pair (Rear)
Dundon Motorsports suspension listed for the 992, 991, 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991997 - Dundon MotorsportsβπΊπΈ
991 GT3 & GT3RS Adjustable Sway Bar End Link Pair - Front
Dundon Motorsports suspension listed for the 991, 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991997 - Dundon MotorsportsβπΊπΈ
991 GT3 & GT3RS Adjustable Sway Bar End Link Set - Front & Rear
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991.2 GT3RS Weissach Package End Link Spacer Pair (Rear)
Dundon Motorsports suspension listed for the 991, 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991997 - Dundon MotorsportsβπΊπΈ
991.2 GT3RS Weissach Package End Link Spacer Pair (Front)
Dundon Motorsports suspension listed for the 991, 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991997 - Dundon MotorsportsβπΊπΈ
991 GT3/RS Suspension Shim Kit - Complete (Front & Rear)
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
992 GT3 & GT3RS Suspension Shim Kit - Complete (Front & Rear)
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
997 GT3/RS, 981 GT4 & 718 GT4/RS Suspension Shim Kit - Complete (Front & Rear)
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
991 GT3/RS Rear Rebound Adjuster for MCS 3-Way Damper
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports Extended Length Titanium Tie Rod End Set
Dundon Motorsports suspension listed for the 992, 991, 997, 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991997996Titanium (grade not disclosed) - Dundon MotorsportsβπΊπΈ
991 GT3/RS & 981/718 GT4/RS Front Upper Strut Mounts / Camber Plates
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
992 GT3 Front Lower Inner Control Arm - Pair
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
992 GT3RS Front Lower Inner Control Arm - Pair
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports 992 GT3 & GT3RS Front Upper Camber Link - Pair
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
992 GT3/GT3RS Upper Camber Link Eccentric Shims
Dundon Motorsports suspension listed for the 992. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992 - Dundon MotorsportsβπΊπΈ
991 GT3 & 981/718 GT4/RS Lower Control Arm Inner (+3mm) - Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
991 GT3RS/GT2RS Front Lower Inner Control Arm (+15mm) - Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Aragostaπ―π΅
Coilover Damper Kit, 911 Carrera 2 (964)
Japanese coilovers catalogued per 964 variant rather than as one generation-wide kit.
Suspension & Chassis9646061-T6 Aluminium - Aragostaπ―π΅
Coilover Damper Kit, Carrera RS (964)
The RS-specific fitment, valved apart from the Carrera 2 kit.
Suspension & Chassis9646061-T6 Aluminium - Aragostaπ―π΅
Coilover Damper Kit, 911 Turbo (964)
The 964 Turbo fitment.
Suspension & Chassis9646061-T6 Aluminium - Aragostaπ―π΅
Coilover Damper Kit, 911 Carrera 2 (993)
The 993 Carrera 2 fitment β a Japanese alternative to Bilstein and KW on the air-cooled cars.
Suspension & Chassis9936061-T6 Aluminium - TEINπ―π΅
Bespoke Damper Build, Porsche
Fully made-to-order dampers for applications outside the standard catalogue, Porsche included.
Suspension & Chassis964993996997991 - Dundon MotorsportsβπΊπΈ
981 718 991 Sway bar Extension kit (SOFT)
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
996 997 Subframe Bushing Removal Tool KIT
Dundon Motorsports suspension listed for the 997, 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997996 - Dundon MotorsportsβπΊπΈ
996 997 Subframe Bushing SET
Dundon Motorsports suspension listed for the 997, 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997996 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports Rear Tie Rods for 991 992 Carrera/S/4S/GTS
Dundon Motorsports suspension listed for the 992, 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991 - Dundon MotorsportsβπΊπΈ
997 GT3/GT3RS Adjustable Front/Rear Lower Control Arm Pair
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
997 Carrera/4/S/GTS Adjustable REAR Lower Control Arm Pair
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
996 Carrera/4/4S/Turbo Adjustable Front/Rear Lower Control Arm Pair
Dundon Motorsports suspension listed for the 996. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis996 - Dundon MotorsportsβπΊπΈ
991 GT3RS & GT2RS Adjustable Front Lower Control Arm Pair
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
Adjustable Front Lower Control Arm Pair for 991 GT3
Dundon Motorsports suspension listed for the 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis991 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports 991/992 Carrera Adjustable Sway Bar End Link Set - Front & Rear
Dundon Motorsports suspension listed for the 992, 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991 - Dundon MotorsportsβπΊπΈ
Front Adjustable Sway Bar End Link Set for 991 & 992 Carrera/S/4S/GTS
Dundon Motorsports suspension listed for the 992, 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991 - Dundon MotorsportsβπΊπΈ
Rear Adjustable Sway Bar End Link Set for 991 & 992 Carrera/S/4S/GTS
Dundon Motorsports suspension listed for the 992, 991. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis992991 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports Suspension Setup Package for 997 Carrera/S/GTS (RWD)
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997 - Dundon MotorsportsβπΊπΈ
Dundon Motorsports Suspension Setup Package for 997 GT3/GT3RS
Dundon Motorsports suspension listed for the 997. Specification below is what the seller states; construction is not disclosed on the listing.
Suspension & Chassis997